Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   Installing Hunter 44260 thermostat (https://www.askmehelpdesk.com/showthread.php?t=226892)

  • Jun 14, 2008, 06:14 PM
    chillidogb
    Installing Hunter 44260 thermostat
    I bought a house with 6 wires coming out of the wall they are
    White, Yellow, Blue, Brown, Red, Green
    My Hunter 44260 has inputs for
    G,RC,RH,Y/O,W/B,Y1
    I'm not sure how to wire this?
    I have a air conditioner and gas heater not sure what else

    Please help
  • Jun 14, 2008, 06:34 PM
    westnlas
    The one I installed yesterday the green wire went to the G terminal. It.s the fan
    The white wire went to the C or common terminal
    They Red wire went to the RH (heat) terminal
    The Yellow wire went to the Y terminal.
    The blue and brown wires were unused.
    At my heater control panel the yellow and red wires are spliced together so the condenser bypasses the heat control panel. My unit was installed when the house was built in 1994 and I am quite confident that the wiring is standard. That is the way I replaced the first t-stat years ago and had no problems. Good luck with it.
  • Jun 14, 2008, 06:59 PM
    wmproop
    Best thing to do is take the hunter back where you got it before you try to install,, it probably won`t work anyway,, they are junk ,get you a honeywell tstat for a heatpump,if that's what you have,it will have great instructions as how to install

  • All times are GMT -7. The time now is 06:58 PM.