Kenmore Elite Washer Error Code F4 what does it mean?

Kenmore Elite Washer Error Code F4 what does it mean?

That would indicate a problem with the recirculation pressure switch, I think.

Here is a link to some information that may be of help.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/106d19d1437eb1eb85256ab000622c81/$FILE/4322673.pdf

Error code on Kenmore Elite F4: dL F

Error code dL F what is it, how to repair it. I understand it's the trap, where is it located

:)

Quote:

---

Originally Posted by progunr

That would indicate a problem with the recirculation pressure switch, I think.

Here is a link to some information that may be of help.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/106d19d1437eb1eb85256ab000622c81/$FILE/4322673.pdf

---

My washer is giving me a F1 or FL code it's a kenmore elite 110.270.87601 can you help please

For me, I had too much clothes in the washer. Five pairs of jeans and a good amount of other clothes. After a minute or two of the start of the cycle, it would stop working and show code F4. I tried to resart it a few times and same code F4. Then I decided to remove some of the clothes because I knew it was a big heavy load and it went through the whole cycle like a champ. :) Hope this helps you.