I have a refurbished Supreme Whirlpool washing machine. I think it is about ten years old. Lately, it has started leaking water when I do a load of laundry. The water is leaking from underneath the washing machine. I would like to find a way to fix it instead of having to go and buy a new one.

You will need to open unit up to see where it is leaking. Is it from the tub seal or drain pump or drain hose?

How do I do this? I don't think I have any manuals as far as opening this machine.

You should have an acess panel on the back of unit held on by 2 screws that you should be able to check for a leak. If unable to see from there. You can use a putty knife to push in on the 2 spring catches ate the top approx. 2-3" from each edge. This will remove the front panel to access from the front