I replace the watter pressure switch after repairs of a pump. Now I'm not able to sett the kick in and shut off limits (it's the one with manual shutoff lever and two adjusting nuts).
Thank you
Mark
![]() |
I replace the watter pressure switch after repairs of a pump. Now I'm not able to sett the kick in and shut off limits (it's the one with manual shutoff lever and two adjusting nuts).
Thank you
Mark
This site will cover it very well. Look about halfway down.
Dictionary of Water Pump Controls & Switches - private pump and well system do-it-yourself repairs
Good morning Mark,Quote:
Originally Posted by MarkKeny
First turnoff the power at the breaker box, then pull the cover off the pressure switch and you will see two spring loaded bolts secured with nylon nuts. One tall, one short. To increase the cut in pressure, turn the nut on the tall bolt down. To increase the cut out pressure,(that's the one that will give you more pressure) turn the nut on the short bolt down. This should let youset the pressure that you desire. Good luck, Tom
All times are GMT -7. The time now is 07:15 PM. |