ZC engine don't stays ECU cuts fuel New Dizzy on my CRX 89
Hi! I have a big problem, im desperate to get my CRX runnin. I got the car on the third day it started having problems like: it turn on but after like a minute or so it would die, i took it to the shop they check it and there was no spark well very little not enough so they tell me the dizzy was not working well. i went to buy the parts to fix it (coil, module,rotor,cap,and all wiring) they tell me they don't sell all that separately so i bought a new one for like $300, lifetime warranty and all that. i went to the house as fast as i could put it back on and it just cranks for a while, fires up then dies right away. Its all it does! I took it several mechanics n they all gave me different answers: The ecu is not working, the injectors are not working, fuel pump dont work, some wire is burned up. I checked everything they told me: change ecu, injectors were good, pump has good pressure, and about the wires im not sure wich one could be the problem. It has been there in my house under the porch still n lonely, my lovely CRX is dead!!. Can anyone help me!!!! Back to the question the dizzy i bought fits perfectly to the wiring, it clicks right in! I think because they also change the wiring harness of an integra together with the engine, so I Thought they shouldn't be any problem! but here i am! I have read on some other pages that u r suppose to swich some cables of the dizzy but dont know exactly wich ones. I have also read that wen they engine does what mine does (CRANKS theres spark, TURNS ON for like less than 2 secs then DIES) The Dizzy is not working good (but its new!!). I think the problem why it doesnt stay on is because the ECU cuts the Fuel, it has to do something with the Dizzy thats what i've read. Its been TWO MONTHS now since is like that im crying to get it on the streets!! I NEED SIRIOUS HELP SOMEONE!?!!! THANk U!
