The hot water faucet chatters after a few seconds of flow
![]() |
The hot water faucet chatters after a few seconds of flow
Is it a one handled or a two knob faucet. What brand? How old? Back to you, Tom
It is one handle faucet, about 5 years old made in IsraelQuote:
Originally Posted by speedball1
But I don't remember the brand. It was recommended by the plumbing supply house
The chatter occurs when asking for maximum flow from the hotwater At reduced`flow it does not chatter
Any help would be appreceated
You haven't given us much to go on here but shut the water off to the valve and open it up. Tighten any loose screws and check for debris. Now turn the water back on to flush out the sopplies and open valve body. Reassemble and test. Let me know, Tom
All times are GMT -7. The time now is 08:32 AM. |