I purchased this faucet from an open box , ( no directions ) hooked it up , logical way ( have some plumbing experience ) , I only get hot water out of the sprayer when the handle is up and charging the sprayer , the cold runs all the time and can't be shut off from the handle , took handle apart and put back could not see problem

Did I hook up wrong lines to wrong feeds ? Seems they are labeled hot to hot feed cold and the sprayer line seem right ?

The model is Corrego 61/9 thank you

I'm trying to pull information off the web without much luck. Let's have more details. You didn'[t say but this is a kitchen faucet. Correct? One handled or two knobs? I thing you may have bought a "open box" item that someone has robbed a part out of. Please give me all the details that you have. Regards, Tom

Hi speedball thanks , it is a single handle kitchen faucet , I did almost have it working OK till I fooled with the washer on the line that goes from the handle to the faucet after messing with that ( tried to seat it correctly ) it then went bonkers and doesn't feed right , the model is deck mounted with hot and cold line feeding directly to handle , a spray line ,
And the short line from handle to spout
Thanks

I'm still looking for more details. Would this have a separate spray attachment or a pull out spout?

Quote:

---

I fooled with the washer on the line that goes from the handle to the faucet

---

What line? Are we talking about a pull out spout here? More details please! Tom