What is the best way to level the base of a stand up shower I'm installing.
The back end needs to be raised a 1/2 inch
![]() |
What is the best way to level the base of a stand up shower I'm installing.
The back end needs to be raised a 1/2 inch
So you are installing a new shower pan, right? 1/2" is a bit much to hope to raise with just mortar of fill. I would cut some scaps of 1/2" ply wood or backerboard and raise the back edge and then install some strips of 1/4" through the middle. Before setting the pan I'd cover the floor area will well placed baseball sized globs of modified thinset, prevents vreaking and movement later on.
All times are GMT -7. The time now is 01:15 PM. |