We installed a new faucet, and we can't get water to come out now. I took everything back off, cleaned it... reattatched all the hoses, and still nothing... please help. (In the kitchen) and yes I turned the water valve back on...

HeatherV - Are you sure that the shut off valve did open up, To make sure ,take the riser line off and hold towards a pan to catch any water, after losing turn shutoff valve back on very slowly and see if water comes out , if it does then you know that water is getting to the faucet, Question - did you take the faucet apart, if you did then you may have put it back togreather wrong? IF both prove to be OK then take the faucet back off and take it back to where you got it because it probley don't have a hole on the inside of the faucet to let water threw, I ran across this ( 2 ) times where the hole for water to come through WAS NOT THERE.:: Good luck and GOD BLESS;; F.B.E.

HeatherV - How have you came out on the faucet , Is it working right yet?? F.B.E.