Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Electrical & Lighting (https://www.askmehelpdesk.com/forumdisplay.php?f=105)
-   -   Wiring for pump drawing water from lake (https://www.askmehelpdesk.com/showthread.php?t=211410)

  • May 1, 2008, 03:51 AM
    tgmor
    Wiring for pump drawing water from lake
    I am installing a 1 1/2 hp monarch pump to draw lake water for sprinklers and other uses. What type of wire should I bury? I will be running 120 feet from house to pump.
  • May 1, 2008, 02:55 PM
    donf
    What does the label on the pump tell you?
  • May 1, 2008, 05:52 PM
    stanfortyman
    Is it 120v or 240v?
    What is the amperage of the motor?
    Are you going to use conduit?
    How are you going to control the motor?

    The way you ask this question is WAY too vague.
  • May 1, 2008, 07:08 PM
    Washington1
    To add to Stan's questions:

    5. When you say from house to pump, are you planning to pull power from the panel?

    • All times are GMT -7. The time now is 05:02 AM.