Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Electrical & Lighting (https://www.askmehelpdesk.com/forumdisplay.php?f=105)
-   -   Light dims when saw is run. Follow up (https://www.askmehelpdesk.com/showthread.php?t=208534)

  • Apr 22, 2008, 02:49 PM
    GONZOSMC
    Light dims when saw is run. Follow up
    I ran the sub panel, which has slots for 2 breakers, from a 40amp dual pole breaker which was used to run an old pool pump using the existing wire which is "AWG 12 cu2 CDR with AWG 12 ground type UF-B 600 volts" the distance is about 75 feet. Additionally, I have the sub panel set up to run two 110 20amp breakers. Thanks in advance for any additional help
  • Apr 22, 2008, 05:52 PM
    stanfortyman
    Why don't you delete this post and move it over to the other existing thread. It is impossible to keep track of all the related information if you start a new thread every time you need to add information.

  • All times are GMT -7. The time now is 11:35 AM.