Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Appliances (https://www.askmehelpdesk.com/forumdisplay.php?f=157)
-   -   Kenmore Dishwasher-Clean light blinking (https://www.askmehelpdesk.com/showthread.php?t=205335)

  • Apr 13, 2008, 10:37 AM
    mkmajors
    Kenmore Dishwasher-Clean light blinking
    Any idea how to reset the dishwasher? There are two buttons to push that will reset it, but I cannot remember what they are. HELP!
  • Apr 13, 2008, 01:44 PM
    esquire1
    Try pressing the heated wash then heated dry one after the other about 5 times. This should reset the unit.
  • Dec 12, 2011, 05:10 PM
    janneb1
    Thank you so much!
  • Nov 17, 2012, 04:49 AM
    scott046
    YES - Success - Alternate between the two buttons - Heated Dry and high temp - with the door open, start by pressing the Heated Dry once and then the High Temp button once and continue to alternated between the two until all the lights light up on the control board - then close the door and make sure it latches shut - - then hit the cancel button and all light should clear off - the unit is reset and should operate as normal

  • All times are GMT -7. The time now is 04:35 PM.