Hi my names Kathryn,

I am new to this site and hoping someone can help. I have an MTD Ride-on Mower that the blade driver belt has come off except for one bit that is still attached to the spring loaded pully. When I put the seriel and model number into the MTD site it is not recognised so I cannot look up any manuals for it.
I desperately need a diagram of how the belt should be routed but can't find one anywhere because the sites always ask for the serial & model numbers.

The cutting deck has four pully's with a v-belt, I think its supposed to cross over somewhere but can't work out how it all goes. Does anyone have a diagram please? I notice a lot of people have asked this question but no diagrams as yet have been attached.

Many thanks

Kathryn

What is your model #.

It's a MTD Yardmaster HE 4160, Model no:13AE414E643 Seriel No:AJ250L10043

I have a similar problem yet my belt for the cut deck melted and snapped. My ride on isn't the four pulley system though. Just the 2 pulley, going straight from the motor to the top of the cutting deck. It would be good to find an answer to this amazingly common question and problem hey