Replacing old Nordyne thermostat with Honeywell RTH110B
I have recently purchased a Honeywell RTH110B non-programmable thermostat, and I have a couple of questions regarding the wiring of it. The current wiring of the currently installed Nordyne thermostat is as follows:
Y = yellow wire
G = green wire
R = red wire
O = orange wire
W2 = white wire
E = dark brownish almost black colored wire
C = blue wire
My new thermostat is confirgured as Rh, Rc, W, Y,& G. How do I wire the new thermostat based on the old configuration above?
Marqtee
