I have a Kenmore 417 that I want to stack with my dryer. How do I get the top off so that I can stack the dryer on top? The manual does not give any answers and I can't find the answer on Sears.com.

I assume that your washer must be a front load, correct? And I have used a small pry bar before. Sometimes I have made damages to the cosmetics, and sometimes not, be careful.

There should be 2 white caps at the bottom of dryer hiding screws..

Remove caps and then the screws... Tilt dryer back and slide forward

To remove it.. also for repair this is good..

Frigidaire, White Westinghouse, Magic Chef, Maytag Performa Dryers, common repair info, no heat, noises, how to take apart

Sears Kenmore [Archive] - Appliance Blog Forums

Thank you. I was hoping not to cause cosmetic damage. Yes the washer is a front load.

We got the top off the washer by simply taking two screws out of the back panel and then sliding the top towards the back. Thank you for the posts.:) :) :) :)