Hi
I have a small hole on the bottom my Bathtub, about 6mm in Diameter. Does anyone know the best way, or products to use to repair it.
The bath is about 8 yrs old.
Thanks
Rugpig

Hi rugpig:

What kind of material is your tub made from?

Hi Massplumber2008
The Bath is pressed metal with white enamel finish
Thanks Rugpig

This stuff, SealAll, MAY work. Seal-All 050307 It's usually available at hardware stores.

Hi guys:

Try the porcelain filler 1st (see pic.)... called porc-a-filler

Then try porc-a-fix over that (see pic.2)... Hopefully that does the job.

Check out this website below for info.

AOL Image Search results for "porcelain fix"

Or could try the stuff KISS suggested... lots of good products out there that will fill that hole.

Let us know how it goes... Mark

If this answer helped please RATE THIS ANSWER. Thank you

.