Can anyone help me = my TV has stopped working - when I switch it on it goes into standby mode as usual and the red light comes on as usual - then when I switch it on the green light just keeps flashing - instead of staying on and I cannot get any proggrammes

Other than internal troubleshooting, you could unplug for a minute, plug back in and hope for the best.

The TV has a fault in internally. The flashing is self diagnosis the flash rate is an indication that would tell an engineer where the fault lies. PSU fault or Frame fault.

Eng65

Try unplugging the unit and while unit is unplugged hold the volume up button and channel down buttons down and while depressing both buttons plug the unit in. Let go of the buttons and the unit should come on in the service mode. There will be a small k on the screen. With the sharp remote press the channel up button once. This should bring up a menu that will show a lamp error line. If the lamp error is = to 5 the unit is in lamp error shut down. User channel down to highlight that line and curser right arrow to highlight the lamp error #. Hit the enter button to clear the lamp errors. Now unplug the unit and let it sit for a minute and plug back in. I hope this corrects the problem. If the unit does not come on by doing this or if it does and you do not find lamp errors the power supply pcb may have been damaged by the surge.

Is this a mitsubishi ws-55513 TV