How do I replace the primer bulb on my Echo grass trimmer model 1E SRM-2400?
I purchased to part but can't get to the 4 screws to replace.
Thanks
Dilady

Believe you need a 3 MM Hex Wrench -- to remove the motor housing screws

http://www.echo-usa.com/pdf/document...T1E_092499.pdf

Hope this helps -- please rate my answer

Thanks Biggsie but the primer bulb is located just behind the fuel tank cap but it's impossible to reach and has 4 tiny philips head screws. I don't know if I need to remove the fuel tank to have access to these screws. I will contact Echo tomorrow.
Thanks for your assistance

Echo will have a diagram for you to look at probably. And yes, you probably will have to remove the tank, or other housings.

I have been having problems getting a Ryobi leaf blower to run -- but I found

The magic way to get it running -- Sea Foam is like a carberator cleaner

I put some in a squirt bottle and put a little in the gas tank and a couple squirts

In the carb intake... Really think this is a fantastic product -- TRY IT!