After power up, using the transmission lever, I have neutral, forward and reverse but I can not engage the blades (runs exactly like the forward).
Any clue on how to fix it?
![]() |
After power up, using the transmission lever, I have neutral, forward and reverse but I can not engage the blades (runs exactly like the forward).
Any clue on how to fix it?
MTD tiller have two things that could cause this. There is a drive belt to the transmission that could be off or the shear pin to the tiller axle is sheared.
Is this a rear tine, or a front tine tiller?
It is a real tine
Quote:
Originally Posted by MOWERMAN2468
All times are GMT -7. The time now is 05:30 AM. |