My turf tiger won't staying running When I start the mower it will continue to run until I allow the key to return to the run position. If I hold it in the start position it will run but I know the starter is still spinning. What is the fix?

Check your wiring that goes to the switch. Probably the switch itself.

I have the same problem and came up with switch senario also. Replaced with new switch, still have same problem!

Quote:

---

Originally Posted by TRUBBLESHOETEN

I have the same problem and came up with switch senario also. Replaced with new switch, still have same problem!

---

Can you perhaps suggest a different fix? My Scag turf tiger has two 20a spade fuses. First one will blow, then replaced, and the other will blow! Thanks

I have the exact problem, did you ever resolve it?

Replace control module.

Wasn't the control module. Ended up being the voltage regulator which failed due to the control module connector shorting to ground.

:)