I hope I am asking this in the right area.
Anyway I am in the process of purchasing a mig welder and have lake of experience in this field. I need a mig welder to use on 1/4 inch steel.
What should I look for?
As well what are some tools that help out with mig welding? Like gloves, helmet with protected eye wear and so on. The more information the better. I look forward to peoples advise and information. Thank you

Sorry by the lack of responses but we don't seem to have too many welders here. My only experience with MIg or TIg is that I bought an automatically darkening helmet that sees the arc and darkens the screen. I like it much, much better than shaking me head trying to get the old helmet to drop down, under $100.

Quote:

---

Originally Posted by ballengerb1

Sorry by the lack of responses but we don't seem to have too many welders here. My only experience with MIg or TIg is that I bought an automatically darkening helmet that sees the arc and darkens the screen. I like it much, much better than shaking me head trying to get the old helmet to drop down, under $100.

---

Thanks.. I Have one in mind that I am ordering on line. Any thing else?

Just don't buy your welder from places like Habor Freight. Lincoln is pretty much the caddy. Check the power requirements so you will know what you have or need from your panel. Don't know much else.

Quote:

---

Originally Posted by ballengerb1

Just don't buy your welder from places like Habor Freight. Lincoln is pretty much the caddy. Check the power requirements so you will know what you have or need from your panel. Don't know much else.

---

Cool. I was on the lines of a Lincoln or a Miller. I know what you mean about the power which is required for the size of welding I am going to do, I will be using argon gas. I am getting more and more familiar with mig welding every day from what I can read on line. But I can never get too much information. So if you or anyone else has some more information please do add. Thanks

This is a nice selection guid by miller. Gets you through the basics.

http://www.pirate4x4.com/tech/billav...rs%20Guide.pdf

Leather welding outfit, gloves and an auto-visor are essential.

So might jigs, a welding table etc.

I ran across this website sometime ago: New Virtual Private Server for acies NAME -- acies.tempdomainname.com

Quote:

---

Originally Posted by KeepItSimpleStupid

This is a nice selection guid by miller. Gets yu through the basics.

http://www.pirate4x4.com/tech/billav...rs%20Guide.pdf

Leather welding outfit, gloves and an auto-visor are essential.

So might jigs, a welding table etc.

I ran across this website sometime ago: New Virtual Private Server for acies NAME -- acies.tempdomainname.com

---

Thank you. One more steep closer. Anyone else that would like to add. Like I stated before the more the better. Thanks

You will need to not only need safety equipment, but also make sure you have a save environment for operating a welder. Also check to see the availability of gas for the welder. The gas needs to be placed onboard the welder and secured, or secured to a wall in a "safety zone".

In order to weld on 1/4 inch, you will need to find a 225 amp machine to do a good job.
Smaller machines will work if your welds are small and if you are doing a lot of welding you will need to look at the machines duty cycle. Usually a 60 percent duty cycle will do anything you want to do. Some good machines are hobart, miller,& lincoln. Make sure you use the proper shade lens in your welding helmet, usually for a mig welder it will be a shade 10.

Quote:

---

Originally Posted by MOWERMAN2468

you will need to not only need safety equipment, but also make sure you have a save enviroment for operating a welder. also check to see the availability of gas for the welder. the gas needs to be placed onboard the welder and secured, or secured to a wall in a "safety zone".

---

Thanks but I know about securing it. I have bought a cart for the welder and tank. But thank you for the information. If you have more information to offer please do.

Quote:

---

Originally Posted by jennyrene

in order to weld on 1/4 inch, you will need to find a 225 amp machine to do a good job.
smaller machines will work if your welds are small and if you are doing alot of welding you will need to look at the machines duty cycle. usually a 60 percent duty cycle will do anything you want to do. some good machines are hobart, miller,& lincoln. make sure you use the proper shade lens in your welding helment, usually for a mig welder it will be a shade 10.

---

I really like your advise that you have added. Thank you
I will be using a welder for making trailers. It will be square tubing metal less then 1/4 inch thick metal. What do you recommend for a type of welder?
I will be using a mig welder not a tig welder and I will be getting a stick welder for metals I encounter in the near future. More advise would be greatly appreciated. Thank you and I look forward to your reply. As well with others if they have more to add.

One of my best friends just stated to me at work that I would need allot of tools like magnets for the angles, Some sort of hammer, and a few others. Can some one please inform me on other types of tools that will be needed. Your advise will not go under looked. I again am very grateful for all the advise posted but more the better. Thanks

Mig welders are normally used for production applications they make a good strong attractive bead but a stick welder gives you more strengh and versatility. The types of welding process you can do with a stick machine are less painful than as with a mig. But if I was going to be building trailers I would go with the mig.I like lincoln welding machines best. Tools you will need are endless the magnets your friend mentioned to you are great because they are like a second set of hands they give the ability to hold something while your hands are free to tack the metal parts together. You will need to have a tri square framing square if you use pipe you will need a wrap around. Clamps are a must , such as c clamps, vice grips, clamps come in different sizes but start with 4 inch and 8 inch. You will need a 3lb hammer, 4 inch grinder, soapstone , if you have any more questions I'm glad to help, I've been in the welding field for 14 years now but, I still don't know every trick in the book.

I would suggest either a hobart or lincoln, other than that I'll just say when you do start welding it should feel smooth in your hand if you weld and it jumps, pops, or gets stuck on whatever your welding check the distance you're holding it from the metal. Getting stuck means too close and the jumps and pops means too far away, the trick is to be steady and smooth with you're strokes as you weld. Good luck

Quote:

---

Originally Posted by jennyrene

mig welders are normally used for production applications they make a good strong attractive bead but a stick welder gives you more strengh and versatility. the types of welding process you can do with a stick machine are less painful than as with a mig. but if i was going to be building trailers i would go with the mig.i like lincoln welding machines best. tools you will need are endless the magnets your friend mentioned to you are great because they are like a second set of hands they give the ability to hold something while your hands are free to tack the metal parts together. you will need to have a tri square framing square if u use pipe u will need a wrap around. clamps are a must , such as c clamps, vice grips, clamps come in different sizes but start with 4 inch and 8 inch. u will need a 3lb hammer, 4 inch grinder, soapstone , if u have any more questions i'm glad to help, i've been in the welding field for 14 years now but, i still don't know every trick in the book.

---

Thank you. Do you recommend any other tools that could or may help? You really do sound very much educated in this field. The more the information the better. Would you recommend me to get a stick welder as well?

Quote:

---

Originally Posted by hern172

i would suggest either a hobart or lincoln, other than that I'll just say when you do start welding it should feel smooth in your hand if you weld and it jumps, pops, or gets stuck on whatever your welding check the distance you're holding it from the metal. Getting stuck means too close and the jumps and pops means too far away, the trick is to be steady and smooth with you're strokes as you weld. good luck

---

Thank you. Where can I get more information on this issues. I plane on practising on a plat before making a trailer. Do you know any videos I can get online for mig welding?

If anyone is still reading this. I do have a question more along the lines of welders. I have been looking online at EBay and noticed welder for sale. I really won't to purchase a miller or Lincoln mig welder but saw a few others allot cheaper. Does anyone have anything to add to this. Would it be okay to purchase a cheaper mig welder or should I stick with a miller or Lincoln? Your info would be much appreciated.