I can not get the Sat and Sun temperature set. How do I do that?

Here you go

http://customer.honeywell.com/techli...0s/69-1800.pdf

I set the thermostat to go to 57 at night and 68 in the daytime. Have it set for6 at night and 6 in the morning. For some reason it goes up to 70 in the evening and I can't get it to turn off. I turned every program to 57 last night and it stayed at 57 . It don't say on the paper I have what to do. I turned it on this morning at 6 am . My son installed it and I have one sheet of paper but it don't tell me much. What do I due. Apparently it is resetting it self to default setting and I don't know how to stop it. Can you help me. Or send me instructions. I'm 71 years old but not smarter than a fifth grader

Can I get directions on how to set this thermostat up? It had one spot that it had all ______-------- in it. And it kept going to 70. My paper don't tell me about this . Nor how to set clock. ;)

Quote:

---

Originally Posted by minpin10

can I get directions on how to set this thermostat up? It had one spot that it had all ______-------- in it. and it kept going to 70. my paper don't tell me about this . Nor how to set clock. ;)

---

This link below contains all the information available from Honeywell.

See section 4 through 5.3. It will answer all your questions on programing.

This is the same link as above.


http://customer.honeywell.com/techli...0s/69-1800.pdf