I used this scanner when I had windows ME - have now upgraded to XP and it won't work. What should I do?
THanks

Hi,
What is the model number of the scanner?

Some Visioneer Scanners will not work with XP, some not with XP SP2.
Here is a link to Visioneer models:
https://visupport.visioneer.com/Port...e-d872d8f2ede9
Click on your model number at the above site, and there should then be a link for compatibility with XP.
Also, before you installed XP, running the Compatibility check, from the menu, would have been a good idea. But, anyway, check the link above to see if there are drivers to download for your model for XP.
I do wish you the best of luck. And if any other question, please post back.

When I had this installed with windows xp is used Text Bridge Software (I have the install cd) I installed the scanner using this cd but the scanner "could not be found" Have done this about 10 times - install/uninstall and have also been to the visioneer website but can't seem to find anything there.
Thanks

Which Visionneer model scanner do you have?

Im not sure but I see a number FU661E - does that help at all? The paperwork that came with it says "Visioneer 600dpi" - nothing else. Sorry

Their site (https://visupport.visioneer.com/Port...0-223d4053d3c5) shows model numbers as 4 digit numbers.

Hi,
The model number should be listed underneath the scanner, and should be something like these model numbers from the site above I gave:
9420
9320
9120
9000 and 9020
8900 and 8920
8800 and 8820
8700
8600
8100
7700
7600
7300
7100
6600
6400
6200
6100
6000
5800
5600
5300
4800
4400
3300
3100
3000
OneTouch

Maybe these will help.