Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   Day & Night furnace (https://www.askmehelpdesk.com/showthread.php?t=169068)

  • Jan 5, 2008, 10:30 AM
    jmyklebust
    Day & Night furnace
    How do we clear an IGNITION LOCKOUT FAULT?
  • Jan 5, 2008, 01:09 PM
    hvac1000
    Turn all power off. Wait a minute and re energize.
  • Feb 24, 2008, 09:17 AM
    valirock
    Quote:
    Originally Posted by hvac1000
    Turn all power off. Wait a minute and re energize.
    The blower fan comes on immediately when I plug the unit, but the ignition doesn't start.
    How can I reset the unit?
  • Feb 24, 2008, 12:02 PM
    hvac1000
    The blower fan comes on immediately

    Sounds like the high limit is tripped. If it is and has a red button in the middle of the disc reset by pushing the red disk. You migh also have a different problem if your unit has a roll out device in the burner area. Those cannot be reset but replaced.

    NOTE make sure your thermostat is not set to fan on.

    • All times are GMT -7. The time now is 04:29 PM.