I purchased my washer in March 2002. It is displaying an error message "FL" and occasionally a "Ld" message. It is filling with water but will not go through the wash cycle and empty the water. I have been told that there may be a recall on this machine. Does anyone know how I can find out or fix my problem?

"FL" flashes if any overfill condition occurs. This condition occurs when excessive water in the tub causes the overfill switch to trip. The control must realize that the trip was due to an overfill condition instead of a suds lack condition in order for "FL" to be displayed
With an overfill condition, the beeper repeats a warning every 10 seconds with no time-out. The pump is cycled in drain mode for 30 seconds on, 30 seconds off until the overfill switch resets or power is discontinued to the unit.
Press STOP/CANCEL to clear the display.

Problem

Problem

Sorry for the cryptic answers. I was trying to work on a sign in problem with my dad-in-law. Hope he can get the answer he needs. K

Hi, can you help me.
My washer machine is not completing the washing cycle. It kept stopping and it shows the code LD message. Also the water is inside of the machine and the clothes is not squeeze.

Why this is happening?

Thank you!