We recently bought a house here in Hawaii that had a Kirkland Washing Machine (made by Kenmore) installed in the area under the house (as is common here). When we checked it out, it filled and agitated, but would not run through the complete cycle. After agitating, the water just sits in the tub and does not discharge. The discharge pipe is at the correct height so something else must be the problem. Perhaps the contacts in the timer are corroded from the high humidity, or some other part needs to be replaced. Any ideas?

Check the water filter and the water pump I think the problem lies there... perhaps something blocks the water to go out from the tube or the water pump is dead or blocked