Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Wet bar installation (https://www.askmehelpdesk.com/showthread.php?t=160446)

  • Dec 7, 2007, 05:11 PM
    mowash
    Wet bar installation
    Hello, I have a basement rough in for a wet bar sink and I want to install the sink myself, any help I can get (with pictures if possible) would be greatly appreciated. I'm new at this.
  • Dec 7, 2007, 06:12 PM
    Stratmando
    Try this:
    Download Moen Instruction Sheets, Specification Sheets, Exploded View Parts Sheets
    Not sure if this is the site I used before, But a least 1 Plumbing company has excellent resources for Anyone. This may be the one, or one of them.
  • Dec 8, 2007, 06:41 AM
    speedball1
    Will this sink be wall hung or will it have a cabinet?
  • Dec 8, 2007, 11:41 AM
    mowash
    It has a floor standing cabinet
  • Dec 8, 2007, 12:22 PM
    Stratmando
    Speedballs is a pro, can help with the difficult, this may also help.
    HomeTips DIY: How To Install a Bathroom Sink or Lavatory
  • Dec 8, 2007, 03:21 PM
    speedball1
    Quote:

    Originally Posted by mowash
    Hello, I have a basement rough in for a wet bar sink and I want to install the sink myself, any help I can get (with pictures if possible) would be greatly appreciated. I'm new at this.

    Stratmando put up a great link for you to follow. Lavatorys install like bar sinks
    OK! We now know that there's a cabinet. What material and what's the size is the stubout coming out of the wall? What size is the tailpiece coming off the bar sink drain? If the drain tailpiece lines up with the trap raiser then this should be simple. Have you got the water run over to it yet? Have you installed the angle stops for the supplies yet? You say you have a rough in. Describe it. Don't forget the cabinet should be secured to the wall. Cheers, Tom

  • All times are GMT -7. The time now is 08:04 PM.