Ok... here's the question:

I shut the main water valve off so I could work on replacing the washer hoses. Did the work, turned the water back on and now I have nothing!

We tried knocking on the tank... nothing. We emptied some of the water from the tank... nothing. All electrical is OK and was not touched...

Anyone?

Thanks,

Dean Sparks

Quote:

---

Originally Posted by Sparksfarm1

Ok.....here's the question:

I shut the main water valve off so I could work on replacing the washer hoses. Did the work, turned the water back on and now I have nothing!

We tried knocking on the tank...nothing. We emptied some of the water from the tank....nothing. All electrical is ok and was not touched......

Anyone?

Thanks,

Dean Sparks

---

Well, it would seem the pump is not cutting in. Is the switch cutting the pump on?

Quote:

---

All electrical is OK and was not touched...

---

Are you saying the pump control contacts are closed and the pumps running dry or does the pump not run at all?