Installed new units 2 1/2 ton goodman units, installed factory 14.25 kw heating element. My biggest problem is the low voltage wiring. The indoor unit has 5 wires coming out they are red,green, white, brown, blue. The outside unit has 5 wires also, blue, white, orange, yellow, red.

The cond. Unit is pretty much cut and dry. R to air handler R. Y to stat Y. O to Stat O. White/W2 to Air Handler White/w2. Blue/C to air handler blue/C.

The stat terminals are what has me nuts. They are AUX,E,L,C,G,Y,O/B, (RC,R have a jumper)

THE PROBLEM IS I HAVE NO POWER TO STAT WHEN I TRIED TO UNDERSTAND THEIR TERMINOLOGY

CAN ANYONE GIVE ME A CLUE WHAT WIRE GOES TO WHAT TERMINAL ON THE STAT.

THANKS PATRICK

http://customer.honeywell.com/techli.../69-1900ES.pdf

http://customer.honeywell.com/techli...0s/69-1726.pdf

It will be listed here.

Also check the sticky notes at the beginning of this board.