Second p trap for bathroon sink drain
I have a sink that when the water is first turned on you get a sewer gas smell that comes from the overflow hole in the sink. You can also feel air along with the smell coming out of the overflow. I have checked the vent pipe going to the roof and it is clear. I replaced and lowered the existing p trap under the sink thinking I would get more water in the trap for a better seal. I was thinking of placing another p trap in the 11/2" drain pipe that runs to the 4" main drain right where it tees with the vent pipe. My questions are: Can I just splice this trap into the existing drain and have both ends of the p trap at the same level, or does one side of the trap need to be higher than the other? Will this solve my problem? Thanks