Hi everyone nice to be here, hope I can help with questions and answer,
Hey I need to drill like about 600 holes in porcelain tile ( made by mirage) to install clothes line in bathrooms.
I use a diamond hole saw bit ( 1/4" ) and a spray bottle and on Saturday 17, I did only 16 holes and 3 bits warn out.
Is there any other way I can do this

Thanks
chiefhandy:D

Check this out:

http://www.constructioncomplete.com/...?v=ObNb7kmv4_Y

Speed, drill choice and coolant are going to make a big difference in the lifetime of the bit.

There is pretty good guide article on digg - Digg - The Ultimate Guide To Drilling Porcelain Tile