I have a 60 amp fuse box it has 6 s type fuses all say 30 amp, I believe these should have been different values. 2 of 6 of these fuse slots don't work, so the previous owner just doubled up the lines on the fuses that work.
This is a mobile home with an adition which is tied to the pwer where the furnace was removed. I have 3 floorboard heaters w/ thermostats that need wired in, however I would like to change the fuse box to a breaker box first.
- would this work to replace 60amp to 100 amp?
100 Amp Indoor Load Center Value Pack
- Do I need romex 12/2 to wire the new baseboard heaters?