Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Printers (https://www.askmehelpdesk.com/forumdisplay.php?f=431)
-   -   Donf - ? For you - Paper type properties - Laser Printer (https://www.askmehelpdesk.com/showthread.php?t=148820)

  • Nov 5, 2007, 12:36 PM
    KISS
    Donf - ? For you - Paper type properties - Laser Printer
    Don:

    I can configure my laser printer for the following paper types:

    Plain
    Light
    Heavy
    Card Stock
    Bond
    Color
    Preprinted
    Letterhead
    Pre-punched
    Recycled
    Labeled
    Envelope
    Rough
    Transparency


    Which paper type would cause the printer to deposit the greatest amount of toner at the lowest temperature. i.e. I don't want it to stick well.

    -or-

    Can you rank the paper type with increasing fuser temperature?
  • Nov 5, 2007, 12:56 PM
    donf
    KISS,

    Good afternoon sir.

    Draft or light, put the least amount of toner on the page.

    The rougher or thicker paper is the more toner is used.

    The first pass through the fuser is heated to the highest temp. The second pass through on the duplex option, the fuser is not heated as high, to prevent the first side from melting and getting scraped off.

    Other than that, there is that much difference in the toner amounts drawn to the charged page.

    Don
  • Nov 5, 2007, 01:21 PM
    KISS
    Wouldn't a thicker paper use a higher temperature and transparancy the least?

    Wouldn't transparency sometimes have to disable some of the paper-path sensors I know that wasn't part of the question.

    The reason why I'm asking, is what might be the best paper setting to use when doing a "toner transfer method" for making printed circuit boards.

    The duplex thing makes sense.
  • Nov 6, 2007, 05:43 PM
    donf
    Kiss,

    You have me on that one. I all the years I worked around the IBM and Lexmark, I never saw cb created off toner scrape use.

    Let me think about this, If you are using melted toner to to create the circuit paths prior to the solder bath how do you force the toner to adhere to the board?

    I can see if anyone still remembers me back in the Kentucky lab, but I have been gone almost three years now.
  • Nov 6, 2007, 06:09 PM
    KISS
    Look at this link:
    HeadWize Projects - Etching a Printed Circuit Board with the Toner Transfer Method by Christopher Garber

    And Gootee's link at the bottom of that page.

    I tried some stuff called TEC-200 film a long time ago and had no luck.

    I prefer polyester paper and photo exposed.

    So, I'm asking for future reference and I've been chatting with someone from the .au domain.

  • All times are GMT -7. The time now is 07:50 PM.