I have a clare furnace model # HEM8 90-8 direct vent. The blower motor started making a lot of noise so I removed it and checked it out. There is a fan blade inside and it broke free from the piece that slips over the shaft. I tried to get it to stay which it did for a bit and it started making the noise again. I guess I need at a minimum a new fan blade or a new blower motor, the problem is I can not find one anywhere. The information I got of the blower motor is as follows: Model Emerson K33HXCFE-964 Volt 120 RPM- 3450 Pt.No. M-053 Mfg. No. M008.

Any information would be greatly appreciated. Thank you.

M053 Clare Bros. OEM ***

K 33 HX CFE-964 M053 CLARE BROS OEM

The 3 *** means it is Original Equiptment Motor. You will have to contact Clere brothers for a replacement or get yours rebuilt.

Clare (also known as Clare Brothers) is a product line of oil furnaces, and is owned by International Comfort Products(ICP) (which in turn is owned by Carrier, which is a wholly-owned subsidiary of United Technologies Corporation). ICP markets furnaces under the brand names of Arcoaire, Clare, Comfortmaker, Dettson, Heil, KeepRite, Lincoln, and Tempstar. Clare makes residential furnaces and is headquartered in Canada. Clare does not have a public website.



OR contact ICP they might be able to steer you to a company that will have the motor and other parts you need.

Phone:
ICP Customer Support: (931) 359-3511
ICP's Administrative Offices: (800) 458-6650

The blower motor is simpoly non existent anymore. Im having to have the induced draft motor rebuilt on the unit I'm fixing... Good luck finding it and if you do.. please buy two... one for you, one for me thanks;")

Post pictures of the old motor with specs.

It's a 3.0 amp 3200 rpm Electrohome with a 5/16 drive shaft. I have no idea how to post a photo on here

Go to advanced then to paperclip then pick the picture off your computer and upload.

Ihave the same problem fan is plastic and self destructs in tim. Likely made in china
The furnace is only 15 years old, now I have to replace it?

We have a Clare brothers furnace Model CMD080NH3R serial #960221187. I would like to know how many BTU this furnace is and if it's a high or mid efficiency.

My guess would be 80%, minimal efficiency today, with a 96,000 BTU input.