I have just purchased a Hunter Programmable Thermostat Model 44110. I have taken out the front panel off my old thermostat and notices that my wires are red, white, yellow and green. The panel for the Hunter 44110 has the connections for G, Y, W and the RC and RH have a jumper. What do I do with my red wire? Do I unhook the RC/RH jumper?
Please help!!

The red wire should jumper and connect to both the RC and RH terminal.

My thermostat is an old mercury Honeywell with 2 wires. Red and white. I am installing a hunter 44110. Where do I hook the red and white wires

Quote:

---

Originally Posted by dj.unlimited

Where do I hook the red and white wires

---

If it is for heat only: RH & W