Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Other Engineering (https://www.askmehelpdesk.com/forumdisplay.php?f=561)
-   -   Circuit Design (https://www.askmehelpdesk.com/showthread.php?t=145110)

  • Oct 26, 2007, 12:49 AM
    cal918
    Circuit Design
    Where do I start if I need to make a scematic to create a circuit that has a 100 ohm resistor and it gives 3 1/2 volts - plus or minus 5%. I can use as many 1.5 volt batteries as needed.
  • Oct 26, 2007, 01:54 AM
    colbtech
    Are there no other components?
  • Oct 27, 2007, 08:45 AM
    Tj3
    Quote:

    Originally Posted by cal918
    Where do I start if I need to make a scematic to create a circuit that has a 100 ohm resistor and it gives 3 1/2 volts - plus or minus 5%. I can use as many 1.5 volt batteries as needed.

    That is problematic since it may be hard to find 1.5 volt batteries that are +/- 5% to begin with. It is also not clear if you are saying that you can only use one resistor or more than one. If more than one, I would use 3 batteries and a voltage divider circuit on the third battery using the resistors to bring it down to a half volt, and then put the three in series to give me 3.5 volts.

  • All times are GMT -7. The time now is 03:44 PM.