I have a enclosed patio with a existing concrete floor I need to remove a portion of it in order to level the floor. What is the best way to do this?

Thanks

E. Bonier

I guess its raised up and you need to remove the high spot?

A 'Partners saw'(gas powered circular saw) with a diamond blade to score the concrete(if your trying to make a square edge to finish too)otherwise, a sledge hammer,electric jack hammer,or renting a high output compressor and air hammer.

Oh yeah,, LOTS of labor:)

Hope this helps,

Ken

They also make a grinder for bigger sections to use, lots of dust but no cutting and sledge hammering,

If it's a low spot just use a resurfacer