Heil 7000 High Eff
Purge blower turns on
Pilot fires, main gas will not open / fire or rather honeywell (VR82041075) MV won't open. Electronic board MV output voltage is what to valve? No manual.

Module HQ1005962EX

The gas valve is 24 volts, make sure someone has not turned it to the off or pilot position.
There is a flame sensor in the burner area, check to insure you have a good flame and it is touching the sensor (a rod with a wire going to the ignition modual) try sanding the sensor rod, good luck, Mike