I'm replacing the head gasket on my 95 altima. When I pulled of my valve cover I was supprised to see that they are HEX bolts (damn it! ) I don't have a large set and I'd like to buy just the size I need. So anyone know what size they are?
Thanks

I haven't worked on Nissan's for many years, but if you need to buy the correct tool, whoever sells them should be able to tell you what size your car takes. On some models it will be a 12 point 10 mm (Toyota's use that size ) while some other use a 10 mm long-reach Allen

Quote:

---

Originally Posted by CaptainRich

I haven't worked on Nissan's for many years, but if you need to buy the correct tool, whoever sells them should be able to tell you what size your car takes. On some models it will be a 12 point 10 mm (Toyota's use that size ) while some other use a 10 mm long-reach Allen

---

I go to sears. Always idiots at the counter that don't even understand Standard and metric.