Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Shower Knob Stuck (https://www.askmehelpdesk.com/showthread.php?t=135396)

  • Sep 30, 2007, 03:25 AM
    BobVilaNot
    Shower Knob Stuck
    Hello. My hot water shower knob has been stuck for months and the only way I can turn it is buy using channel locks. Though I don't think this has anything to do with it, the knobs themselves used to fall off all the time, and so during a weak moment I epoxied them into place. I know, not a smart move. :o I'm hoping the channel locks will work indefinitely because a fix would involve cutting into the wall from the opposite side, because it is a plastic shower stall. I'd appreciate any thoughts on this from a qualified person. Thank you.
  • Sep 30, 2007, 05:40 AM
    speedball1
    Good luck with the channel locks because to change that stem and washer assembly you'll hafta get that knob off. If you have to open up the wall to change out the shower valve you may use Sharkbite Fittings, Cash Acme - Products - SharkBite® Connection System - Push Fittings™ instead of having to solder inside the wall. Good luck, Tom

  • All times are GMT -7. The time now is 01:27 PM.