Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Line for dish wascher (https://www.askmehelpdesk.com/showthread.php?t=128683)

  • Sep 12, 2007, 06:45 AM
    STONECOTTO
    Line for dish wascher
    Am doing my kitchen over and I will like to install a dish wascher. Is do I have to install 2 different lines for cold water and hot am moving the sink from where it is to put in a different location so I know I have to exten the pipe. Thanks
  • Sep 12, 2007, 06:51 AM
    speedball1
    Most dish washers only have a hot water inlet. The dishwasher supply may be tee'd off from the sinks hot water supply,(and cold if needed. Regards, Tom
  • Sep 12, 2007, 06:58 AM
    ballengerb1
    Keep in mind that you also need to install a drain from the dishwasher so keep the install next to the sink. If you have a garbage disposer you can connect the drain to the disposer. Remember to poke out the plug inside the disposer inlet.

  • All times are GMT -7. The time now is 04:20 AM.