I just purchase 2 Hampton Bay Accent lighting systems(models147-466 and 148-652). My question is can I wire them toghter. No where on the boxes does it say whether this can be done, but model 147-466 say itcan take up to 200wats. With both system it only 120 wats. These are going under my kitchen cabnets and I have a 10ft run and only one wall outlet. Can you help?

Quote:

---

Originally Posted by hgesink

I just purchase 2 Hampton Bay Accent lighting systems(models147-466 and 148-652). My question is can I wire them toghter. No where on the boxes does it say whether this can be done, but model 147-466 say itcan take up to 200wats. With both system it only 120 wats. These are going under my kitchen cabnets and I have a 10ft run and only one wall outlet. Can you help?

---

it means you could connect A * 200w transformer to it ( not 2 (two) 100w)

There is not a transformer involed with this system. The box in question is called a APPLIANCE CONTROL E187537 120Vac 60hz 1.85A 200w(inductive / resistive load) Model:EE081 66170/06 FOR INDOOR USE ONLY. Each light has a (UL) E176939 SPT-2 VW-1 105*C 300V 18AWGX2C XINYA cable coming out of it to be connected to a ZING EAR plug. I did purchase this through Home Depot and there people were not much help. I'm not sure if I'm even explaining this right.

Hgsink,

Where can I purchase the box that you are talking about? I have the same box and it is broken. Thx