I have a 1988 Dodge Dakota 3.9 manual trans. The maintenance required light is on I have run the code and have done a safety inspection. How do you turn the light out?? [

Quote:

---

Originally Posted by lgosbor

I have a 1988 Dodge Dakota 3.9 manual trans. The maintenance required light is on I have run the code and have done a safety inspection. How do you turn the light out????????[

---

On Dakota, the module is located behind the instrument panel on a bracket below the headlamp switch.
RESET PROCEDURE

1. Turn ignition key on.
2. Insert a small screwdriver into small hole on module case and close switch.
3. Turn ignition key off.
4. Remove module from bracket.
5. Remove module battery cover and install a replacement 9 volt battery (if equipped).
6. Reinstall module on mounting bracket.

Code 12 is simply a reset indicator.
Code 33 is A/C cut-out relay fault.
It may not be working, possibly stuck or corroded?
How's the A/C functioning?

.

Got your answer to code 12 and 33, this unit doesn't have AC.

Quote:

---

Originally Posted by lgosbor

Got your answer to code 12 and 33, this unit doesn't have AC.

---

You must not live in the south! :eek: