Hi all,

2 questions:

1.) I need to connect a basement roughed-in 2 inch drain to a whirlpool tub. I believe that I can use 1 1/2 inch cheap sink drain to attach to the 2 inch drain. It appears to be really easy to configure. I will use the same for my shower drain?

2.) Can I fill in the little 1 foot sand box with concrete. One of the tub feet needs to rest on top of the 1 foot sandbox.

Thanks


Chris

1.) I need to connect a basement roughed-in 2 inch drain to a whirlpool tub. I believe that I can use 1 1/2 inch cheap sink drain to attach to the 2 inch drain. It appears to be really easy to configure. I will use the same for my shower drain?

You may drain to a existing floor drain only if you,(1) Run a separate vent for the tub **or** (2) if you drain the tub through a indirect waste located a inch or so above the floor drain opening. You can not hook it up direct as you have described.

2.) Can I fill in the little 1 foot sand box with concrete. One of the tub feet needs to rest on top of the 1 foot sandbox.

This is the drain line you should be connecting to because the drain line's run and the tub will be vented. Break up cement and move the trap and raiser and tie to that. Good luck, Tom