1 Attachment(s)
Shower - sliding door - plastic flange
The plastic flange/guide at the bottom of the sliding shower door broke in half. Photo of an unbroken part attached. As a result, there is nothing to keep the door from swinging into the stall and possibly falling off the top track. The shower was installed in 2000 by a prior owner. I do not know the manufacturer. I tried several hardware stores and bath speciality shops. I tried calling the plumber who installed it. Please let me know where I can buy replacement parts. Thank you.
Comment on Maddcus's post
How was it listed on eBay? Do you remember who you purchased them from??
Thanks
Comment on massplumber2008's post
Comment on massplumber2008's post
Thanks very much for your help!
I did go to the handware store. We checked several departments but nothing that would work, Don't think I will attempt making something myself, maybe another member of my family could. It is sad that they don't have them anymore the shower is in perfect shape just the panel guides are broken. If you should come across something that would work please email me. I do not think we will be replacing it anytime soon.
Thanks again, I appreciate your checking this out for me.
Lynn
Comment on massplumber2008's post
Hi
Sorry cannot send you a part. I can send you pictures of the part if that would help. I have one that is still good. For a little piece of plastic it does a big job and it is doing it solo. Not only does it glide but it holds the door in place otherwise the door is only hanging from the top nothing on the bottom. How would I send you my email address?
Thanks again
LYNN
Comment on massplumber2008's post
Hi
Sorry it took so long to respond I have had a lot of company. We are going to work on it and see what happens. If we fail then I will contact you again. Thanks so very much for the help it is really appreciated.
Have a good one!
Lynn