Hey Guys, Nichols Trim Here With Question, Were Looking At Building A Deck With A Brick Foundation And Composite Decking On Top, It Will Have 3 Steps With (brick) Risers. And That's My First Of 2 Questions, Ive Got A Pic Of It But Does Anyone Know Of A Good Way To Pull This Off. Also The Band Of The Deck Must Be Consealed Behind The Brick,
All You'll See Is Brick And Then The Decking Board,
Now I Don't Want To Use Tapcom Screws Or Ramset Nails For This,
Any Sujestions Are Welcome, Thanks Eric
