Ask Me Help Desk - Canon C755 Multipass printer

I'm not sure anybody can help me but here goes. My problem is with my Canon C755 Multipass printer. Whenever I try to print (either a Test print or from WordPad) I receive the following message: "To print this document a BC033 Color Cartridge is required. The device has a BC-30 cartridge/ink tank. Please place the correct type of cartridge in the device or replace any ink tanks that may be empty and clock OK when the device is ready."

The problem is, I DO have a BC-33 cartridge installed with all the tanks full. The printer just won't print and I keep getting this same error message all the time. It's running on WinME and all the drivers seem to be identified and up-to-date. I've even run the cartridges through all the cleaning processes.

Can anyone who's had experience with this particular printer suggest something I might try to correct this problem. Thanks

Hello,

I just recently worked on three Cannon printers, all giving me the same problems, and they weren't that old. It must be something in the printers that cause that to go bad, since I did all the troubleshooting you did along with many other things.

Personally, I don't like Cannon, I've had to repair or trash many more of these printers than any other brand by far. I'm pretty sure its just time to get a new printer, because some sort of sensor has gone bad.

If you get another one, may I suggest a Lexmark. I've had many good experience with them myself, and any clients that I give a Lexmark to always have good comments on those printers. I've noticed that their printing life lasts longer also.

Good luck!

Quote:

Originally Posted by glenmere

I'm not sure anybody can help me but here goes. My problem is with my Canon C755 Multipass printer. Whenever I try to print (either a Test print or from WordPad) I receive the following message: "To print this document a BC033 Color Cartridge is required. The device has a BC-30 cartridge/ink tank. Please place the correct type of cartridge in the device or replace any ink tanks that may be empty and clock OK when the device is ready."

The problem is, I DO have a BC-33 cartridge installed with all the tanks full. The printer just won't print and I keep getting this same error message all the time. It's running on WinME and all the drivers seem to be identified and up-to-date. I've even run the cartridges through all the cleaning processes.

Can anyone who's had experience with this particular printer suggest something I might try to correct this problem. Thanks

Its possible that something is wrong with the print head causing it not to recognize the cartridge properly. Canon's do have a rep for printhead issues. I would suggest contacting Canon for their opinion. I doubt if it's a software issue.

I would NOT recommend a Lexmark printer. In fact, it's the only printer I warn people away from. While they do a good job of output, they run through ink like crazy. Lexmark's have, by far, the worst cost per page ratings in the industry. That's one reason they are so cheap. HP's are clearly the class of the printer market, selling more printers then all their competitors combined. HP basically invented both the laser and inkjet printers.

When comparing output quality, there is no discernable difference from manufacturer to manufacturer. But when comparing feature sets, reliability, cost per page and support, HP generally comes out on top. In a recent Consumer Reports printer issue, HP had 6 of the top 10 models.

OK, yes, definitely listen to ScottGem - he definitely does know more than I do... I have worked with HP also, and have had many good experiences with this brand also.

ScottGem: good point, now that I remember a little more, you are certainly correct about the ink issues.

Thanks ScottGem for your reply. I did in fact contact Canon but it didn't help. They more or less encourage me to buy a new Canon or take to to a Authorized Repair shop rather than find the problem to my C755. Both ways it would cost more then to toss it.

Quote:

Originally Posted by glenmere

Both ways it would cost more then to toss it.

This is actually becoming almost a standard issue with some printers. Given the cost of ink cartridges it is sometimes more cost effective to buy a new printer then replenish the ink. This is especially true of the under $100 printers. Unless you have a high-end printer costing several hundred dollars, it is often more cost effective to replace then repair. Of course this is true in many other industries as well. Ever repair a toaster, can opener, VCR?