Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Appliances (https://www.askmehelpdesk.com/forumdisplay.php?f=157)
-   -   Kenmore Dishwasher (https://www.askmehelpdesk.com/showthread.php?t=113191)

  • Jul 24, 2007, 07:42 PM
    LooneyLouise
    Kenmore Dishwasher
    Stock Number 16849
    Serial Number FE4711416
    Model Number 1684993

    Suddenly started leaking between the bottom of the dishwasher door and the top of the bottom faceplate. We moved into this house 7 months ago. No owners manual. This is not while the dishwasher is draining. It is just a few minutes after you start it up, as it is filling with water. It didn't just start leaking a little bit. When it started leaking, it really went full blown. Any suggestions as to what is causing this and how to fix it?
  • Jul 25, 2007, 04:29 AM
    esquire1
    I would do a very close visual on this when it is pouring out. A leak that size should not be difficuilt to locate. You might also with washer not running put a flashlight inside pointing toward door and see if you can see anything. Maybe even some crud has gotten under door and not letting it seal properly. Good Luck
  • Jul 25, 2007, 11:40 AM
    LooneyLouise
    Thank you for the suggestions. We'll try that.

  • All times are GMT -7. The time now is 04:23 PM.