Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Spyware, Viruses, etc. (https://www.askmehelpdesk.com/forumdisplay.php?f=477)
-   -   DSO Exploit (https://www.askmehelpdesk.com/showthread.php?t=1124)

  • Jul 7, 2004, 06:54 AM
    edongon13
    DSO Exploit
    How to get rid of DSO Exploit in windows XP?
  • Jul 8, 2004, 04:28 AM
    Penfolds
    DSO Exploit
    Check the Alicka's instructions at :

    https://www.askmehelpdesk.com/cgi-bi...96807;start=15
  • Aug 18, 2004, 04:05 PM
    kenshelp
    DSO Exploit
    Try SpyBotSD
  • Aug 29, 2004, 11:39 PM
    ThisTastesNasty
    Re: DSO Exploit
    Ah yes the ilustrious DSO exploit. Its damn near imposible to get rid of because its everywhere. Got rid of it 3 times this week.
  • Sep 4, 2004, 12:36 PM
    rugcutter
    Re: DSO Exploit
    Re: DSO Exploit
    « Reply #11 on: May 22nd, 2004, 1:31pm » Quote Modify

    --------------------------------------------------------------------------------
    If all your critical updates are installed you are protected against DSO Exploit and the finding in Spybot is just a nuisance. Eliminate this by doing the following:

    1 Open Spybot and select 'advanced' mode.
    2 Select 'settings' in the left column.
    3 Select 'ignore product' in the left column.
    4 Select 'security' tab.
    5 Place check mark in box beside DSO Exploit.
    6 Close program
    7 Open Spybot and run a scan.

    This was posted by SUDBURY elsewhere in this forum.

    It works!
  • Sep 28, 2004, 01:09 PM
    argeldeggy
    Re: DSO Exploit
    go to start button, go to run, type REGEDIT,  then Enter,
    go to HKEY_USERS, go to .DEFAULT, go to the first (software) that appears, go to Microsoft, go to Windows, go to CurrentVersion, go to Internet Settings, go to Zones, click on ( 0 ), click on 1004 on right panal, now right click on 1004, go to Modify, now type the Value name/ type this:   REG_SZ, press OK, now right click on 1004, go to delete, now right click on right panal, go to new, type value name:  1004, right click again on 1004, change Value date to   3, the Base will be set on Hexadecimal.  You are now finished.

    I forgot to add that you will chose DWORD
  • Nov 29, 2004, 07:28 AM
    monad
    This is what I did
    I went to http://www.pchell.com/support/dsoexploit.shtml I read the information and followed it to the letter. I had to make four setting changes. I had five entries in total before hand. If your PC is up todate with all updates then as far as I know you are safe even if the DSO Exploit shows up. However it can be removed anyway. ;)
    It is all of the above in more detail...
  • Nov 29, 2004, 07:34 AM
    monad
    Monad again.
    My link failed, so try putting it by hand and I will try again on this board
    http://www.pchell.com/support/dsoexploit.shtml I hope it works this time.
  • Nov 29, 2004, 07:42 AM
    monad
    Monad yet again
    Sorry got link to work, if it does not work the first time try try and try again. The only way forward to learn about PCs in my mind...

  • All times are GMT -7. The time now is 04:29 AM.