Where can I find free schematics for an older kenmore dryer for replacing the 279816 (part #) thermal cutoff kit
Have part left over not sure where it goes

Thanks
asil1217

I would follow the wires connecting to cuttoff. I have put 2 cuttoffs in my Kenmore, Never put that other one in. I have it if I need It. Dryer works fine. Replacement may not be better.

Quote:

---

Originally Posted by Stratmando

I would follow the wires connecting to cuttoff. I have put 2 cuttoffs in my Kenmore, Never put that other one in. I have it if I need It. Dryer works fine. Replacement may not be better.

---

Thank you but basically I am trying to put dryer back together and am not sure where this certain part goes do you know how I can get a schematic of the back of dryer when you take off the back.

Thank you so much for your response!!

asil1217

Try this site, Number you gave didn't work. Has worked well in the past:
I believe this site has exploded view or what you need.
Appliance Parts From PartSelect | Repair Parts For Major Appliances
The part sometimes wire is run with the cuttoff, look at anything on heat shroud with wires.
If you have no luck, provide Kenmore model#. Thanks Good Luck.